Why water purifier will bubble oblush _ Industry News

来源:http://www.hefaap.com 作者:Product Center 人气:198 发布时间:2020-06-15
摘要:Why water purifier or blush will appear bubble Published: at 19:28 on May 12 2016 Hits: 9 recently proposed some users filter out of the water after a water purifier installed there as white as oily foam problems, but also that the water pu

  Why water purifier or blush will appear bubble Published: at 19:28 on May 12 2016 Hits: 9

   recently proposed some users filter out of the water after a water purifier installed there as white as oily foam problems, but also that the water purifier is a problem, would not achieve the role of clean water but also pollutes the water.

   on this issue, Xiao Bian consulted a water purifier company engineers, according to the engineer explained: there is a water purifier installed after white bubble is normal. Let small series and everyone will work together to understand this phenomenon it.

   First: membrane filtration capacity in order to ensure water-permeability, the surface of the filter membrane must show hydrophilic properties, but generally hydrophobic film matrix is 鈥嬧€媡herefore requires hydrophilic modifier be modified. General hydrophilic agent (protective solution) have some amphiphilic properties, and amphiphilic properties conducive victorious and stable foam.

   In laymans terms, a bubble in a more stable necessarily reflect the fact: your filtrate persist even measure trace hydrophilic agent, and medical grade and food grade hydrophilic agent (protection liquid) on the human body without regard to basic, so do not worry.

  

Second: the transport distance when pressurized water through the water pipe network water, under pressure, the gas existing in the network and atmospheric gases increases solubility in water , was dissolved in a large number of tap water; and water entering the water pump through the device must also be pressurized to increase power, along with the water pressurizing pump, the water of dissolved gas and increases the pressure of the gas molecules becomes smaller, further increase the solubility.

  

Since the pressure inside the system has always existed, the gas molecules can not be released, when this part of the water system, the pressure on the gas molecules suddenly disappears, so they become the expansion of the bubble we can visually observed, the amount of there will be plenty big gush tiny bubbles appear milky water body phenomena, and then gradually disappear. This is a normal phenomenon purely physical, it will not affect the drinking water.

  

In fact, there is a similar phenomenon, first tap the "blushing." Mainly due to pump the water process and local plumbing process of taking a certain amount of air, acting under pressureDissolved in water is formed of very fine bubbles, while the water conveying pipe, large changes in water pressure and flow, resulting in a large number of fine bubbles entrained water from the tap water flowing, the surface looks like milk cloudy color, to be allowed to stand for a few seconds, a bubble disappear naturally, the water becomes clear. This is a physical phenomenon does not affect water quality.

  

After the rinse liquid is generally protected water purifier filter installed inside a few minutes to ten minutes to normal drinking, do not worry about the water purifier is not clean, because the material used inside the water purifier none of them are harmful to the human body. Pure filtered water is purely physical filtration. Even if some exceptions are also due to some form of physical phenomena. Will not affect the water quality itself, so professional installation after rinsing can rest assured that use.

   Previous: Which brand of water purifiers is more suitable for parents with

   a case: household water purifier filter replacement cycle

本文由Open energy water purifier发布于Product Center,转载请注明出处:Why water purifier will bubble oblush _ Industry News

关键词: Product Cent

最火资讯